Skip to content
Hit the Trails Quicker with Fast & Free Shipping*
Fast & Free Shipping*

2014-2023 Lexus GX 460 Front Bumper

SKU FBGX-01
Sold out
Original price $ 1,299.99
Original price $ 1,299.99 - Original price $ 1,299.99
Original price $ 1,299.99
Current price $ 974.99
$ 974.99 - $ 974.99
Current price $ 974.99

Discontinued

DV8 Offroad's FBGX-01 Lexus GX 460 Winch Front Bumper was created for off-road GX-Series enthusiasts. The bumper is designed to be sleek and follow the styling of the factory bumper, while providing additional protection and clearance. The laser cut honeycomb grille offers winch protection without interrupting airflow to the engine. There are two pod light mounting points behind the grille for additional lighting optionsThe bumper wings allow you to keep the factory turn signals and parking sensors.

Key Features:

  • Stylish and Form Fitting
  • High Clearance 
  • Integrated Skid Plate
  • Retains OEM Turn Signals
  • Retains OEM Parking Sensors
  • Pod Light Mounts Included
  • Sand Powder Dual Coat Finish
  • Accommodates up to a 12,000 lb. Winch
  • 3-Piece Construction

Note: Partial cutting of the factory bumper is required.

Need a winch for this bumper? Check out our DV8 Offroad Winches!

We wrote an article all about the installation of the FBGX-01 found here.

Quality Guaranteed

We are confident in our products and that they will satisfy your needs, however we realize that there are cases where a product may arrive damaged or defective. Our goal is for our customers to be happy. If you are not satisfied with your purchase of one of our products we will assist you in getting refunded* or exchanged for another product.

More Information

Model Fit
Lexus GX 4602014-2023
  • Winch Compatible: Yes
  • Width: Full
  • Light Mounts Included: Yes
  • Fitment: Direct Fit
  • Finish: Micro Texture Black Powder Coat
  • Material: Steel & Aluminum
  • Parking Sensor Compatible: Yes
  • Adaptive Cruise Control Compatible: Yes
  • Front Camera: Bumper is partially visible, but does not impede lane detection.
  • Factory Skid Plate: Both plastic and metal skid plates fit with this bumper.
  • Factory Fog Lights: Do not fit in bumper.
  • Install Notes: Installation time is around 3-4 hours. 2 people are recommended to lift the bumper into place.

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Featured Video

Feature Details

CONCEALED WINCH MOUNT

Up to a 12,000 lb. winch can be mounted concealed within the bumper. There are 2 access points just above the winch.

INTEGRATED SKID PLATE

A skid plate is included with the bumper, which protects vital components in the undercarriage of the front end.

RETAINS FACTORY PARKING SENSORS

The bumper includes sensor hole cutouts in order to retain full functionality of the front parking sensors.

RETAINS FACTORY TURN SIGNALS

The factory turn signals are integrated directly into the wings of the bumper.

RETAINS FACTORY GRILLE CHROME TRIM

The signature Lexus grille trim is integrated into the design of the bumper. Additionally, the laser cut honeycomb grille in the front panel of the bumper provides continuous airflow to the engine.

MOUNTS 2 POD LIGHTS BEHIND HONEYCOMB GRILLE

Two LED pod lights can be mounted towards either side of the winch, protected behind the honeycomb grille.

Why Choose DV8 Offroad?

FREE SHIPPING

Everything ships free in the Continental US! **With the exception of Hard Tops & JL Hoods.

1 YEAR WARRANTY

We offer a 1 year limited warranty from the time of purchase.

DESIGNED IN THE USA

All of our parts are CAD designed and trail tested in the USA to ensure the highest of quality.

Frequently Asked Questions

All of our products ship within 2 business days. If we happen to be out of stock, a sales associate will contact you directly.

We ship from our headquarters in Riverside, CA.

We currently ship only to Canada & US Territories. If you live in a different country, consider using an international courier service.

DV8 Off Road warrants all parts of its manufacture, furnished under this agreement, to be free from defects in workmanship and material for a period of ONE YEAR from the date of purchase. This limited warranty covers the cost of the product.

Read our Full Warranty Policy

We accept returns on damaged items with a valid Return Authorization Number or a RMA number. We will refund the full amount minus the shipping costs for the return and a 25% restocking fee.

In the event that your order arrives damaged in any way, please email us as soon as possible (within 24 hours of the receipt of the shipment) at orders@dv8offroad.com with your order number and a photo of the item's condition. We address these on a case-by-case basis but will try our best to work towards a satisfactory solution.

If you have any further questions, please don't hesitate to contact us at orders@dv8offroad.com.

Read our Full Warranty Policy

Of course we do! In order to receive the discount, use your GovX ID here. .

Frequently Bought Together

12,000 LB. SYNTHETIC ROPE WINCH

View Product

3-INCH ELITE SERIES LED POD LIGHT

View Product

13-INCH ELITE SERIES LED LIGHT BAR

View Product

Customer Reviews

Based on 3 reviews
33%
(1)
0%
(0)
33%
(1)
33%
(1)
0%
(0)
C
Customer
Not quite ready for prime time in some important ways

Lots to like about the bumper, except for some things so far.

First, the instructions are terrible. There are typos, instructions missing steps and only some poor views of what's happening. This has GREATLY lengthened the time it takes to complete this. Also...no parts list? Which bolts go where? How many should I have? Why are there bolts left over?

Second, this was the worst-packed item ever. The spray foam used to seal the box after it was packed is the cheapest foam you could find: pieces of foam have gone everywhere, and I'm thankful I didn't open this where people walk or live.

The parking sensors seem like a nice idea, but there is no way to make parking sensors fit due to a) bad positioning in the bumper or b) the wire isn't long enough, or both. So, one touted benefit here is out the window.

Hey there! We're always available to answer any customer questions! Our techs are always ready to jump on a call and help you out! :)
-Rebeca

G
Guy Crutchfield
Super clean design

Overall the best looking bumper available for this truck (in my opinion.) Big enough and sturdy enough to cover and protect everything important, while dramatically improving the problematic approach angle inherent to the stock GX. Build quality and powder coating are excellent.
Worth addressing some other reviews that I found about packaging and shipping-- I picked it up at the warehouse to avoid delays and problems. Whatever packing problems they may have had have been solved. It was boxed with a ridiculous amount of foam wrapping allowing zero movement in the box. So unless your delivery guy is intentionally trying to destroy it, it's going to arrive in perfect condition.
The other issue I read about was the installation instructions. On this I'm more sympathetic. The instructions are fine if you're a professional installer but for a first timer like myself, it took a lot longer than it needed to. The instructions for cutting the bumper were not super helpful and left out quite a bit of info. I did eventually get it sorted out but only after a lot of trial and error. If anyone from the company is reading this, I'd suggest including a simple paper template that can be placed on the bumper showing exactly where to cut. It would save an enormous amount of frustration.
All that said, the finished product is exceptional. If you're looking for a minimalist but strong bumper for mud or rock crawling, there is no better value.

A
Adam
Great built, great looking bumper with some critical oversights

'+Excellent fit & finish, hardware
+Great looking- looks like a factory option
+Best approach angle to the front tires you can buy

-Fairlead mount hole too small- it rubs on the rope! MAJOR safety problem
-Grille will ONLY fit the DV8 fairlead, which you can't buy without buying their winch
-No recovery points- on an off-road bumper!
-No real crash structure over winch, although the winch mount and skid plate look strong
-Windshield washer tank hangs below bumper unprotected
-No accommodation for attaching wheel well liner or chrome to bumper
-It'd be better if the skid-plate bolts were on the side instead of underneath, where they'll snag on things and get worn off
-Poor instructions. Missing some key steps getting the chrome grille surround off, there are no torque specs, and the fascia cutting directions are less than accurate