Skip to content
Hit the Trails Quicker with Fast & Free Shipping
Fast & Free Shipping

MTO Series Mid-Size Truck Bed Rack | Universal

SKU RRUN-02
Sale
$ 899.99
$ 809.99

This item is in stock and ready to ship!

Our MTO Series Universal Mid-Size Truck Bed Rack was designed to fit a wide variety of trucks, including the Tacoma, Gladiator, Ranger, Canyon, & Colorado. This 2-piece adjustable system accommodates different bed lengths or to better mount a RTT or other gear. With a height of 8-inches from the top of the bed, a collapsed roof top tent will sit at or slightly above the roof of your cab to keep wind drag/noise at a minimum. Accessory mounting provisions are provided along each wall, perfect for a range of different gear. Included with the rack are mounts & hardware for hi-lift style jacks that can be mounted to these locations. 

The MTO Series Bed Rack also provides mounting plates compatible with Standard RotopaX Mounts (Not Included), where you can run either (2) 1 Gallon RotopaX or (2) 3 Gallon RotopaX (with RotopaX extensions). We also provide 8 D-rings on the interior of the rack that can be used as tie-down points. Hidden light pod/bar mounts run the entire length of the rack on each side, giving you a variety of lighting options. Zip-tie tabs are strategically placed along the interior of the rack and can be used for clean wire management. The bed rack is finished in a micro-texture black powder coat and features a simple & quick installation. 

Please Note: We recommend 750lbs as a guideline for static load capacity.  Please refer to your truck’s manual for load limits for your specific model.

Key Features: 

  • Universal Overland Bed Rack for Mid-Size Trucks
  • 8” Height Keeps Low Profile for Roof Top Tents
  • 2-Piece Design Fits Multiple Bed Lengths
  • Mounting Plates for (2) 1 Gal RotopaX with Standard RotopaX Mount or (2) 3 Gal RotopaX with Standard RotopaX Mount and 3 Gal Extension
  • Includes Mounts & Hardware for Hi-Lift Style Jacks
  • Includes 8 D-Rings for Tie-Down Points
  • Works With or Without Factory Bed Side Rail Mounts
  • Hidden LED Light Pod/Bar Mounts Along Entire Rack
  • Zip-Tie Tabs for Clean Wire Management
  • Micro-Texture Black Powder Coat Finish

Install Time


Estimated 2.5 hour install.
Time may vary depending on experience.

Download Install Guide

Download Install Guide

More Information

Model Fit
Confirmed Fitment on: Toyota Tacoma, Jeep Gladiator, Ford Ranger, GMC Canyon, & Chevy Colorado + more mid-size trucks2-piece adjustable system accommodates different bed lengths.
  • Material: 3mm, 3.5mm, 4mm, and 5mm Steel Plate
  • Finish: Micro-Texture Black Powder Coat
  • Fitment Notes: Rotopax mounts will not work with factory Tacoma bedliner that has the storage boxes.
  • Installation Notes: No Cutting Required, direct fit bolt-on. Estimated 2.5 hour install. We recommend 750lbs as a guideline for static load capacity. Please refer to your truck’s manual for load limits for your specific model.

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Feature Details

Universal Overland Bed Rack

This bed rack will fit a variety of mid-sized truck beds, including the Tacoma, Gladiator, Ranger, Canyon, and Colorado.

Low Profile Design

A low profile design, at 8 inches above the bed, allows for adding roof-top tents over your truck bed that won't extend so far beyond the cabin height. This keeps wind noise and drag to a minimum.

Roof Top Tent Ready

Mounting a roof top tent is easy with the 2-piece adjustable design.

LED Light Pod/Bar Mounts

There are mounting points along the entire rack to allow for mounting LED pod lights or light bars wherever you see fit!

Why Choose DV8 Offroad?

FREE SHIPPING

Everything ships free in the Continental US! **With the exception of Hard Tops & JL Hoods.

1 YEAR WARRANTY

We offer a 1 year limited warranty from the time of purchase.

DESIGNED IN THE USA

All of our parts are CAD designed and trail tested in the USA to ensure the highest of quality.

Frequently Asked Questions

All of our products ship within 2 business days. If we happen to be out of stock, a sales associate will contact you directly.

We ship from our headquarters in Riverside, CA.

We currently ship only to Canada & US Territories. If you live in a different country, consider using an international courier service.

DV8 Off Road warrants all parts of its manufacture, furnished under this agreement, to be free from defects in workmanship and material for a period of ONE YEAR from the date of purchase. This limited warranty covers the cost of the product.

Read our Full Warranty Policy

We accept returns on damaged items with a valid Return Authorization Number or a RMA number. We will refund the full amount minus the shipping costs for the return and a 25% restocking fee.

In the event that your order arrives damaged in any way, please email us as soon as possible (within 24 hours of the receipt of the shipment) at orders@dv8offroad.com with your order number and a photo of the item's condition. We address these on a case-by-case basis but will try our best to work towards a satisfactory solution.

If you have any further questions, please don't hesitate to contact us at orders@dv8offroad.com.

Read our Full Warranty Policy

Of course we do! In order to receive the discount, use your GovX ID here. .

Related Products

3-Inch Elite Series LED Amber Pod Light

3-Inch Elite Series LED Amber Pod Light

View Product
3 Inch Cube Light

3-Inch Elite Series LED Pod Light

View Product
License Plate Bracket with Pod Light Mounts

License Plate Bracket w/ Pod Light Mounts

View Product

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dylan Neuman
Rack rocks!

Watched downtimelost and immediately needed the rack for my z71. Packaging was insanely impressive. The only downer was that there was couple nicks on the inside facing mounts for the crossbars. The mounting bracket could be a bit more sturdy but oh well, someone smarter than me designed this so I wont cry. 10 out of 10 I would recommend it to everyone but just make sure you treat any exposed steel and paint it to prevent rust from developing like mine did

Hello Dylan, Thank you for your purchase and the great review. Please send a few photos of the nicks you mentioned to our team at tech@dv8offroad.com and they will be happy to help.

A
Anthony Erekson

After watching Downtime Lost on YouTube I was convinced that DV8 was the brand I wanted in a bed rack for my 23 Colorado TrailBoss. After a few months of R&D a universal Bed Rack was developed. I hopped on the opportunity and ordered mine. The shipping was fast and the Packaging was insanely thought out not to damage anything in the box. This was massive!! Most times things are thrown in box with nothing and they show up damaged or missing parts. This was definitely NOT the case with DV8!! The Rack is solid and well built with great welds all around. I did have one rack that looks like it had a dent but it’s small. If I have a complaint it would be that the mount bracket behind the bed rails doesn’t support as well as I’d like and even with the top rails pushed out a lot I still have lateral movement on the rack as a whole. I’d recommend instead of a flat backing piece have a piece that have a 90 degree on the top the sits under the top of the bed rail for support. I ordered some truck bed clamps to see I that helps. Overall I’d give this a 9/10 score and love the finished product. A lot of thought went into the design and it’s hard to accommodate all types of vehicles when doing a universal style.

Hello Anthony, Your purchase and feedback is greatly appreciated and we want to ensure you are fully satisfied with the RRUN-02 MTO Series Mid-Size Truck Bed Rack. For the damage to bed rack shown in your provided pictures we would like to offer a courtesy refund, please reach out to our team at tech@dv8offroad.com and our team would be happy to help with any concerns you have and provide tips on how to reduce lateral movement.

A
Anthony Erekson
Universal Bed Rack!

After watching Downtime Lost on YouTube I was convinced that DV8 was the brand I wanted in a bed rack for my 23 Colorado TrailBoss. After a few months of R&D a universal Bed Rack was developed. I hopped on the opportunity and ordered mine. The shipping was fast and the Packaging was insanely thought out not to damage anything in the box. This was massive!! Most times things are thrown in box with nothing and they show up damaged or missing parts. This was definitely NOT the case with DV8!! The Rack is solid and well built with great welds all around. I did have one rack that looks like it had a dent but it’s small.

If I have a complaint it would be that the mount bracket behind the bed rails doesn’t support as well as I’d like and even with the top rails pushed out a lot I still have lateral movement on the rack as a whole. I’d recommend instead of a flat backing piece have a piece that have a 90 degree on the top the sits under the top of the bed rail for support. I ordered some truck bed clamps to see I that helps. Overall I’d give this a 9/10 score and love the finished product. A lot of thought went into the design and it’s hard to accommodate all types of vehicles when doing a universal style.